Quick and easy makeover for your front entryway for under $100

First impressions are lasting impressions.    At first glance, it may not seem like there is anything wrong with this entrance.  Upon closer inspection however, I found a rusting hollow metal door, chipped paint, brick covered with vines, mismatched door hardware and a tired light fixture.

Still have a little painting to do, but this should give you an idea of the changes you can achieve with a few simple items and a free weekend:

1)  Remove the vines-Cost $0  (time to complete: 2 days)

The vines are no doubt very attractive and give a formal look, but they are also very damaging to your mortar and are  haven for bugs. Once removed, I pressure washed the brick so the brick’s rich colors would shine through the dust and grime that had accumulated over the years.

2)  Fresh paint- Cost $15  (time to complete 1 1/2 hours)

In this instance, I decided on a color change.  I went from a forest green to a deep red rose color in a quart of Behr’s paint and primer in one.  I added some colorful plants in the pots that flank the entrance that compliment the new red.

3)  New door hardware, door knocker and kickplate-Cost $55  (time to complete: 1 hour)

Because I am trying to maintain a historical feel for this property, I decided on the oil rubbed bronze.  The kick plate concealed the rusting blemish at the bottom of the door while also adding a sense of sophistication to the entrance.

4)  New entry light-Cost $25 (time to complete: 30 minutes)

Same as the door hardware, I found a carriage style light fixture on oil rubbed bronze to place above the front door.

Welcome in!


4 Quick and Inexpensive Bathroom Repairs-No Plumber Required

Ahh, the throne of your home for the king or queen of the castle is located here.  A place to relax and wash the troubles of the day away.   For a room that arguably gets heavy daily use in your home, you can expect that there are many small repairs that can creep up on you in a bathroom.  The good news is that most of the fix-its are very quick and easy and don’t require an expensive plumber bill.

Here’s a quick run down of common problems that can be remedied quickly and inexpensively:

1) Clogged Shower head: Hard water causes calcium buildup over time and clogged holes will cause uneven and reduced water flow.  Before resorting to removal or replacement of the head, you can try using a toothpick to remove the mineral deposits from the holes.  You can also try to soak the head in vinegar by filling a ziploc baggie full of vinegar and attaching it the head with a rubber band or tape and letting it soak for a few hours.  If this doesn’t work, you might consider replacement.

To remove the head, put a piece of masking tape around the arm (flange) for protection of the surface and using a wrench, loosen the shower head by turning to the left. The (flange) arm will stay in place.   Simply discard the old head and screw on the new one.  There are some pretty nice water saving heads available for less than $20.   Make sure you ensure a new watertight seal with white plumber’s tape.  The tape spool is usually blue with white vinyl tape and costs around $1 but well worth peace of mind to be leak free.

(more…)

A Closer Look at Kitchen Counter Tops (Part 3: Natural Materials from Wood, Metals, Concrete)

Closing out the breakdown of the endless possibilities for kitchen counter materials, we take a closer look at some interesting alternatives that may have some drooling for that unique and custom look.  Having seen some of these options like stainless steel and concrete myself, I know my wish list is growing!

Butcher’s block
A chef’s dream, a butcher block looks and acts like a wood cutting board.

Upside:  Easy to cut on but leaves scratches

Downside:  water and heat damage is an issue so a smaller area for butcher block may be considered; scratches and cuts will be noticeable but can be reduced by treating with mineral or linseed oil periodically and can possibly be sanded out depending on thickness.

Cost:  Expect $40-150 psf

Stainless steel
Ideal for a clean, industrial look and blends well with most any color given its neutrality.  This surface is alloy steel that contains a dash of chromium to make it rust-resistant. Stainless steel is typically attached to plywood decking to provide strength and deaden its sound.

Upside:  heat and water resistant; easy to maintain.

Downside: Scratches and cuts are not repairable so you shouldn’t cut on them. Plus, they can be noisy and dent if banged with a pot if they are not supported properly.

Copper
Like stainless steel, copper can give a polished look to your kitchen. Copper is much softer than stainless steel and can warp or dent.  Scratches are considered part of the patina, so you don’t need to worry about them. Over time, copper will change color so you’ll need to polish it or embrace the new shade.

Cost: $85-200 psf

New Trends to watch:

Glass
Tempered glass counter tops mix function and fashion and give kitchens a modern look. Consider a bar top or as a back-splash to minimize maintenance but retain the fashionable look.

Upside:  Available textured, sandblasted, etched or grooved, glass is sanitary since it’s non-porous

Downside:  Though it’s easy to clean it may be hard to keep it looking spotless and free of scratches. Glass is heat resistant and water resistant but can crack if something is dropped.

Cost: $60-300 psf

Concrete

It may sound like something out of Bedrock, but concrete is practical and versatile.  It is easy to shape to any custom layout since it is cast on site. Made entirely of natural materials, this hardened mixture of water, cement, sand, stone and pigment and gaining popularity.

Upside: Heat, scratch and crack-proof;  can be finished in any color, texture or style.

Downside:  Some types may be expensive and requires regular sealing to resist water and staining.  Newly poured counters are more sensitive to heat damage so curing time is important.

Cost: $80-150 psf

If you missed the first parts:

http://agirlcandoit.com/2010/06/15/a-closer-look-at-kitchen-counter-tops-part-1-natural-stone/

http://agirlcandoit.com/2010/06/17/a-closer-look-at-kitchen-counter-tops-part-2-solid-surface-tile-and-laminate/

A Closer Look at Kitchen Counter Tops (Part 2: Solid Surface, Tile and Laminate)

Continuing our review of the vast options available for kitchen counter top materials, let’s take a closer look at solid surface, tile and laminate.

Solid Surface:

Corian: A trademarked brand of solid surface material, this type of counter is made of solid synthetic sheets formed by mixing a mineral compound with polyester and/or acrylic resins and is color consistent

Upside:  custom-made to fit your space; any nicks and scratches can be sanded out and is stain-resistant. Available in a wide range of colors, textures and patterns

Downside:  Can be expensive; doesn’t have the same look and feel as natural stone.  May crack when exposed to hot pots, will stain or scratch  but can be scrubbed or sanded out

Cost:  About $40-$90 per square foot.

(more…)

Follow

Get every new post delivered to your Inbox.

Join 58 other followers